🤽‍♂️🦈🤽🏻‍♀️..🤽‍♂️🦈🤽🏻‍♀️

COME & TRY WEEKEND. 🤽🏻‍♀️🤽🏻‍♂️

Here are the details for the ‘Come & Try’ weekend at Albury Swim Centre.
We’d love to see as many Sharks as possible turn up so we are ready to go for Round 1 the following weekend. 
Please also consider helping set up & pack up. 😁🦈

Practice Match Times- 
SATURDAY 24th October.
1pm- U14 Girls
2pm- U14 Boys
3pm- U16 Girls
4pm- U16 Boys 

SUNDAY 25th October.
9.30- C Women
10.15am- C Men
11am- B Women
11.30am-12.30pm- REFEREE CLINIC
11.45am- B Men
12.30pm- A Women
1.15pm- A Men

* Please note you must be registered to play *

NEW CLOCK TRAINING.
Please take the opportunity to come along and learn how to use the new clocks, there will be people on the table all weekend to assist.
Below is the operating instructions for the new clocks. Please take time to read through.

WATER POLO SCOREBOARD OPERATING INSTRUCTIONS Game Timing
With the timer switch set to pause:
ï‚· Press the reset time button to set timer to 9 minutes, 20 minutes or 60 minutes.
ï‚· Press the adjust time button to reduce time by 1 minute.
ï‚· Move the timer switch to run (downwards) to start time countdown.
Timing Mode
ï‚· Select straight-time to allow the game timer to continue running when the shot timer reaches zero.
ï‚· Select time-on to automatically pause the game timer when the shot timer reaches zero. Resume the game timer countdown by pausing and re-running the game timer switch.
Shot Timer
ï‚· Press the 30 reset button on the shot timer controller reset to 30 seconds.
ï‚· Press the 20 reset button on the shot timer controller reset to 20 seconds.
ï‚· Move the shot timer switch to run (downwards) to start time countdown.
Note 1: Shot timer will only run while the game timer is running.
Note 2: The shot timer will automatically blank if the shot timer count is greater than the game timer count (ie. If the shot timer is reset when the game timer is less than 30 or 20 seconds).
Note 3: To correct the shot timer in the event of an error, pause the game timer, run the shot timer, then double-click the shot timer reset button slowly. When desired time is reached, move the shot timer switch to pause.
Scoring
ï‚· Press Team 1 score button to add a score to the team 1 total.
ï‚· Press Team 2 score button to add a score to the team 2 total.
ï‚· Press the undo/reset button to undo the last entry.
Note: Adding a score to either team will automatically cancel all current penalties.
   
          Period Counter
ï‚· Press the period button to add to the game period display. Numbers will cycle through from 1 to 4.
Time Outs
ï‚· Press the 1 min time out button to start a 1 minute time out countdown.
ï‚· Press the 2 min time out button to start a 2 minute time out countdown.
ï‚· Press the 5 min time out button to start a 5 minute time out countdown.
ï‚· The time out count is show in the top right corner of the LCD display.
Note: The game timer is automatically paused while in time out mode, and resumes counting at the conclusion of the time out.
Siren
ï‚· Press the siren button to manually sound the game siren if required. Note: The game siren will automatically sound when the timer reaches zero.
Penalties
ï‚· Press the penalty button to start a new 20 second penalty. A total of five 20 second penalty timers are available. The number of active penalties is shown in the top left corner of the LCD display. If the scoreboard is a /PT model with penalty displays, the penalty closest to zero for each team will be shown in the display.
ï‚· An operator’s buzzer and indicator provide an alert for the operator.
Note: If the shot time is below 20 seconds, adding a penalty resets the shot timer back to 20
seconds.
Master Reset
With the timer switch set to pause:
ï‚· Hold the undo/reset button for 3 seconds to reset the scores and game period to zero.